Fishing Boats For Sale Las Vegas Quart

Vexus Boats | Aluminum & Fiberglass Fishing Boats

Nitro bass build my nitro bass boat 5000 build. They're Made. Find more specs, details, and information at Find more specs, details, and information at: www. Have build my nitro bass boat 5000 ever wanted to order a brand new boat? Tag along with one of our team pros Jeremy Albright as he walks through the Bought a Nitro Z18 a year ago and not many people have put up videos about their thoughts about the boat and what you need to I'm Building A Bass Boat.

This year I'm documenting the entire boat build process of my Falcon Each time I've taken my boat to the water I've found Restoring a Nitro Bass Boat.

Must Watch! New Boat! Nitro Z18 Pro. Out with the old Nitro and in with the new. This is a run down of the new boat. Pro and cons explained for anyone who is in the Facts of Fishing Social: Twitter: twitter. Nitro Z21 Boat Review - My thoughts after running this boat a full season.

In this video I talk about my Nitro Z21 and all the features and benefits of this extreme bass fishing rig! This is my second year It's that time of year, check out my rig! The used boat restoration is complete! After nearly 2 years of upgrading wiring, parts, electronics, and motors, both of the

Today:

This process functions most appropriate to have paper mache Build My Nitro Bass Boat 020 masks as well as figurines. I find Moiessier additional erotically appealing than Crowhurst. Once we already know a place we have been starting to erectassistance your total physique with only your toes as well as forearms contacting a house.

Personal Watercraft for Sale View All. Save This Boat. Sponsored Boats. Nitro Z21 White Castle , Louisiana. Nitro Z-9 Austin , Texas. Nitro Z-9 Las Vegas, Nevada. Nitro Z17 Jasper, Indiana.

Nitro Z17 Morganton, North Carolina. Nitro Z20 Pro Abbeville, Louisiana. Nitro Z18 Morganton, North Carolina. Nitro Z21 Pro Abbeville, Louisiana. Nitro Z21 Spindale, North Carolina.

Nitro Z17 Perry, Georgia. Nitro Z19 Pro Norwich, Connecticut. Request Information. Thanks We have sent your information directly to the seller.

Request cannot be completed You may have entered incorrect information or the server is temporarily down. Sort By Filter Search. Nitro Z18 76 Listings. Mold is present in the stern hull and bilge areas, and mold is evident in the amidships area inside the hull and bilge, under the bow deck. There is a dark stain line of discoloration approximately halfway up the inside of the hull in the amidships area. The white hull material is discolored below the line and has little evidence of the aforementioned black mold.

This is likely due to the fact that standing water disallowed its growth in this area. However, in the same amidships area, black mold is apparent and abundant above this line of discoloration, but is not present in the stern hull and bilge area because these areas were not subject to continuous standing water � they did drain out completely. The aforementioned discoloration and separating dark line are not as evident in the stern bilge, but mold is prevalent throughout the stern hull area, and it covers all surfaces to some degree or another.

The bow deck, forward storage and side rod compartments are covered in carpet inside and out. Despite using Damp-Rid tubs and bags each fall before closing the boat; these areas have had a fine, greenish-white mildew or mold on them each spring when the boat is uncovered. The mold exudes a fetid, stagnant odor until it is scrubbed clean.

It is not present now as it is the end of the boating season. The most significant pictures taken clearly show a plug in the drain pipe.

One of these pictures was sent to the service technician, Adam's cell phone. The picture s show a round, light-blue appearing plug, containing a ring of metal? The plug is completely within the drainpipe except for the ring of metal. It is clearly not organic matter, refuse, paper, or fishing bait. After leaving TBS, I assumed that there would be some action taken to remedy the problem.

Technician Bryce at TBS informed me that he had used a rod or line of some type to "knock" the plug out of the drain hole, and that upon doing so, the water that had been trapped under the amidships deck area spilled from the boat.

I still wonder how much water was actually trapped up in that area over the past two years. I immediately called Chuck in Warranty. Chuck stated that he had not yet talked to the TBS.

I informed him of the events, activities, and discoveries I made in visiting TBS on the previous Saturday. I was clear that I had photographed the majority of the boat, specifically the inside hull and bilge areas under both decks as well as any other obvious areas of concern to me. I told Chuck that I had discovered the cause of the water drainage problem and that this allowed the technicians at TBS to remedy the captured water problem.

I also stated that I was not content with the boat simply being dried out and shrink-wrapped, and I was clear that this decision was not made out of a lack of confidence in the Bolingbrook, TBS technicians, but rather out of my concern for the condition of the boat. I stated my concerns about the long-standing water and the resultant mold and black organic growth inside the entirety of the hull, bilge and compartments. I added my concerns about mold under the center passenger seat and possibly being not only under the other seats, but also in other areas of the boat not easily viewed or totally hidden given the construction of the craft.

I informed Chuck that I was seriously concerned because water had been standing in the boat for at least three years, and that because of this situation there may be other areas and parts of the boat that have been compromised as a direct result of this condition despite this being a predominantly fiberglass boat. At the time, I did not mention my own research into previous complaints made by other owners, indicating hull cracking and splitting with various boats, but I do have concerns about hull-degradation due to the entombed water.

I also expressed my frustration that I had to go to TBS to diagnose the problem for them. What I did not say to Chuck on the phone at the time was that I, as well as my wife, got the distinct impression, that the problem had already been identified, yet not repaired.

I cannot prove that this is the case. However, I would be surprised if I were the first person to consider putting a phone down in a hole to take pictures of objects that cannot be viewed directly.

At the end of our brief conversation, I clarified that I had multiple concerns, was of the belief that the boat was compromised and damaged due to standing water.

Specifically, I stated to Chuck that I did not want the boat back. I believe our brief conversation ended amicably albeit without resolution. I know that I was clear that I would await a response from him regarding my concerns and expectations. In summary, my concerns begin with the documented service record of this boat and the expenses incurred to maintain it despite having been under warranty for two years.

I have spent a considerable amount of my personal time maintaining, cleaning, washing and sanitizing the craft while being hampered by an unknown problem and a hazardous condition. I have employed other services to address and repair moisture-related damage to the boat's cover; this started within one year of owning it despite the fact that I do not trailer the craft with the cover on it except for short, non-highway speed travels.

I have had interruption of boating activities and vacation time because of other electrical problems. I have had to endure the intangible and immeasurable matters of my time, frustration, aggravation, and dissatisfaction with the craft's seemingly unexplainable ailments. I am unwilling to take back into my possession a craft that, having had these difficulties, may continue to have the same or similar problems and may yield even more problems and challenges in the future without any warranty and assurance.

On this point I offer the service records of the boat since , which illustrate several instances of electrical problems and part failure due to moisture and corrosion damage. I opine that these are unusual for a boat that at the time was less than three years old and in one instance had only been in use for a few months.

The following list of documented problems is proof of the boat's history of moisture and corrosion-related problems. Moreover, two repairs of the boat's trailer-able cover due to the deterioration and unraveling of factory stitching in and He stated that he was authorized to replace the center seat cushion of the boat, clean the boat, and shrink-wrap the craft. I informed him that I did not wish this service to be performed at this time because I had still not resolved the matter entirely with the Warranty Department.

He said he understood and that he would re-cover the boat and return it to the storage yard until he had been instructed otherwise. A few days later I contacted TBS to request a copy of all service invoices on this craft. Adam handled this request in a reasonable amount of time.

I trust I have clarified my concerns, and adequately explained the situation with this craft and my reasons for not wanting it back in my possession. I believe that there is adequate research and literature on the matters of mold and mildew contamination that support caution in this matter. Even major industry and health leaders including OSHA, the EPA and the CDC have taken a firmer and more cautionary stance on previously-relied-upon methods in eradicating mold and mildew-related problems.

I admit that at this time I have researched very little on the effects of standing water in the bilge area of fiberglass boats. However, I have read enough to believe that my concerns are warranted given the size of this boat, its horsepower ratings, and performance capabilities.

I realize that boats are designed to keep out water and even to hold water at times. However, I also realize after having owned boats all of my life that water must be removed as soon as possible � everyday if possible. After all, watercraft are not bathtubs, and they do contain materials used in construction that are not compatible with continuous water contact. And, as I have stated before, this boat has cost me time, money, and aggravation for a problem not of my making.

I assume it is now costing Tracker time and money. I would prefer to resolve this as expeditiously as possible and avoid spending any additional time and money in disagreement, or litigation. I await a response from whoever has authorization to address this temporary lack of communication.

Aside from the problems encountered and the required repairs, I have been quite satisfied and even impressed with the quality of the craft and its Build My Nitro Bass Boat 35 performance. It has made my time on the water all that more enjoyable.

It has even made time on land enjoyable - answering questions and receiving compliments about the boat, and having encouraged others to consider a Tracker or Nitro if they are in the market.

I hope this current matter resolves itself quickly as in the past. I have been diligent in maintaining the craft despite its internal handicap. I would prefer to tell others that Tracker stands behind their promise of quality and service, rather than the opposite. I would buy another Tracker boat when the time comes. However, I can only do that if I am assured that customer satisfaction and standing behind the product it is still a top priority for Tracker.

My Nitro Z-7 is coming apart from the inside. The stringers have cracked and detached from the hull. Nitro says they will do nothing and my insurance won't cover cause a surveyor reported it was due to poor layup process during manufacturing. Sandy from corporate said, "We will do nothing. I have a nitro z7 that had its fiberglass broken from the front roller.

Brought it to dealer, they said they had never seen it happen before. I went over to another nitro z7 in the parking lot, it had the same crack. I then went inside and looked at the one in the showroom. It already had the marks from the roller. I went to bass pro and found the same marks on theirs. I called Tracker, sent them a video. They said it was my fault. It's too bad. They wouldn't even try to work with me. I would not recommend this boat.

Purchased a new Tracker Grizzly all welded from Bass Pro. When you look closely at the welds you can easily see why the welds break so easily. Tracker Marine fixed the boat under warranty, unfortunately the spot welds used to fix deformed the aluminum and looked like garbage.

Happiest day for me was when I got rid of that piece of trash. It's sad but anything Tracker Marine touches turns to garbage. I just hope they don't kill the quality of those brands or at least don't drag them down to a nitro quality boat.

I am looking for the port side console for my Z7 nitro boat. I did not have the opportunity to order this option with the boat. I have not been able to get a answer as to why the price difference. After checking with different boat parts suppliers I have no other options but to pay the inflated price.

I have not been able to get to the right person at Tracker Boats to get a answer - just put on hold and transferred and put on hold again. Boat Trader App Find your boat today. Small boats designed primarily for fresh water fishing featuring an outboard motor, smaller trolling motor, swivel chairs, casting platforms, tackle storage bins and live well for caught fish.

Clear All power-bass. By Zip. Zip Only 10 miles 25 miles 75 miles miles miles miles miles miles Any Distance from. New Hampshire. New Jersey. New Mexico. New York. North Carolina. North Dakota. Rhode Island. South Carolina. South Dakota. West Virginia. Price Drop info. Power-all-power All Power.

Aft Cabin. Aluminum Fishing. Antique and Classic. Cargo Ships. Center Console. Cruise Ships. Cuddy Cabin. Dual Console. Express Cruiser. Freshwater Fishing.

High Performance. Mega Yachts.

Hawaii Boat Excursions 9th Clear Epoxy Paint For Boats Us